150 mm
Reads at arm's length
At this size the shade is not lighting a room, it is an object you sit next to. The perforation is a foot from your eye and that changes which patterns work.
Mini Lamps
150 mm, for the corner that needed something.
A bedside table, a shelf, the end of a sideboard. Close enough to look at properly, which is where the pattern earns its keep.
Shop the range From RM327.00, complete
E27
Nothing to wire
The same turned base and fitted lampholder as the table lamp, with an in-line switch on the lead.
LED only
The right bulb, in the box
6 W, 2700 K, warm - the bulb the shade was designed around, and a safety limit rather than a preference.
Pairs
Two is the usual order
Bedside tables come in twos, and two of these lit together is a different room from one. They are printed to order, so a pair is genuinely a pair rather than whatever the shelf had.
Small, not a smaller version.
Printed to order in Malaysia, one at a time, in a wall a single bead thick.
What is in the box.
Everything needed to have it working the day it arrives. No wiring, and no separate trip for a bulb.
- Shade
- Small — 150 mm across, 140 mm tall, printed in a 0.42 mm wall.
- Turned wood table base
- Rubberwood, E27 holder, in-line switch, 1.8 m lead Makes a table lamp of it. No wiring on your part.
- E27 LED bulb, 2700 K
- 6 W, warm white, non-dimmable The bulb these are designed around. See the bulb guide.
- Colours
- Four. Bone passes about 60% of the light, slate about 23% — pick by what you want the light to do, not by the colour off.
- Made
- To order. Ships by Fri 2 Oct.
The shades on sale now.
Six at a time, and which six changes on what sells. Every one of them is made in this fitting.
Monsoon
Horizontal swells in relief; the glow moves as you walk past.
4 coloursChoose options From RM149.00
Lantern
Offset courses, like a rattan shade rebuilt at a tenth the weight.
4 coloursChoose options From RM149.00
Cirrus
Long interfering swells that read as cloud rather than pattern.
4 coloursChoose options From RM149.00
Basket
A woven grid, printed in one piece and impossible to weave.
4 coloursChoose options From RM149.00
Constellation
Pinpricks only. Off it is a plain shade; on it is a night sky.
4 coloursChoose options From RM149.00
If you are not sure
Which size should I choose?
The measurement is the widest part of the shade, which is how lampshades are sold and how they are shelved.
Small suits a bedside table or a shelf. Table is the one most people want and fits a standard table lamp. Pendant is wider and shallower because it is seen from below and further away.
If the shade is going on a lamp you already own, measure the widest point of the old shade rather than its height.
What does the colour change?
More than the look. The wall is 0.42 mm thick, so the colour decides how much light gets through it as well as what colour that light is.
Bone passes about 60% of the light and gives the softest, most even glow. Slate passes about 23%: switched off it reads as a solid dark object, and switched on almost all you see is the pattern itself. Clay sits between them and throws amber.
Choose bone or sand if the lamp is meant to light the room. Choose clay or slate if it is meant to be the thing you look at.
How does it attach to my lamp?
Every shade has an E27 ring built into it, printed as one piece with four spokes. E27 is the ordinary large screw fitting used almost everywhere outside North America.
It drops over the lampholder and is held by the shade ring, the same as a fabric shade. Nothing is glued and nothing needs assembling.
If you have no lamp yet, add the cord set to hang it, or the wood base to stand it on a table.
Which bulb, and why it matters
LED only, 6 W or less, and this one is not a preference.
The shade is printed in PLA, which softens at around 60 C. An incandescent or halogen bulb inside a shade this close will distort it. An LED runs cool enough that it never gets near.
2700 K is the warm white these are rendered and finished against. A cooler bulb will make bone look grey.