USB-C
Charged from the cable you already have
The base takes the same cable as your phone. How long it runs depends on how bright you keep it - the dimmer is the difference between an evening and a weekend.
Cordless Lamps
A lamp that never asks where the socket is.
The 150 mm shade on a rechargeable base. Dinner outside, a balcony, a bathroom shelf, the middle of a table with nothing running under it.
Not on sale yet Expected around RM338.00, complete
No bulb
The light is inside the base
An LED module in the base rather than a bulb in the shade. It runs cool, which matters more here than anywhere else in the range: PLA softens near 60 C and a cordless lamp is the one people carry by the shade.
60% / 23%
The colour is the product
Bone passes about 60% of the light and fills a table with it. Slate passes about 23% and gives you the pattern and almost nothing else. Pick by what you want the light to do.
0.42 mm
One bead thick
A single continuous wall, no infill. Thin enough that the material itself glows rather than merely holding a shape.
Put it down anywhere.
Printed to order in Malaysia, one at a time, in a wall a single bead thick.
What is in the box.
Everything needed to have it working the day it arrives. No wiring, and no separate trip for a bulb.
- Shade
- Small — 150 mm across, 140 mm tall, printed in a 0.42 mm wall.
- Rechargeable battery base
- USB-C, integrated LED, stepless dimmer Makes a cordless lamp of it. No bulb: the light is built in.
- Colours
- Four. Bone passes about 60% of the light, slate about 23% — pick by what you want the light to do, not by the colour off.
- Made
- To order. Ships by Fri 2 Oct.
Not yet
The shade is ready; the rechargeable battery base is not in stock yet. Ask to be told when it is. Get in touch →
If you are not sure
Which size should I choose?
The measurement is the widest part of the shade, which is how lampshades are sold and how they are shelved.
Small suits a bedside table or a shelf. Table is the one most people want and fits a standard table lamp. Pendant is wider and shallower because it is seen from below and further away.
If the shade is going on a lamp you already own, measure the widest point of the old shade rather than its height.
What does the colour change?
More than the look. The wall is 0.42 mm thick, so the colour decides how much light gets through it as well as what colour that light is.
Bone passes about 60% of the light and gives the softest, most even glow. Slate passes about 23%: switched off it reads as a solid dark object, and switched on almost all you see is the pattern itself. Clay sits between them and throws amber.
Choose bone or sand if the lamp is meant to light the room. Choose clay or slate if it is meant to be the thing you look at.
How does it attach to my lamp?
Every shade has an E27 ring built into it, printed as one piece with four spokes. E27 is the ordinary large screw fitting used almost everywhere outside North America.
It drops over the lampholder and is held by the shade ring, the same as a fabric shade. Nothing is glued and nothing needs assembling.
If you have no lamp yet, add the cord set to hang it, or the wood base to stand it on a table.
Which bulb, and why it matters
LED only, 6 W or less, and this one is not a preference.
The shade is printed in PLA, which softens at around 60 C. An incandescent or halogen bulb inside a shade this close will distort it. An LED runs cool enough that it never gets near.
2700 K is the warm white these are rendered and finished against. A cooler bulb will make bone look grey.